Notes on the use of manual rivet guns

1、Inject a small amount of lubricant from the air inlet nozzle before starting work to ensure the working performance and working life of the rivet gun.
2. Maintain the required inlet pressure. If the inlet pressure is too small, it will reduce the power of the rivet hammer; not only the riveting efficiency is low, the rivet head may also be cracked due to the number of hammer blows.
3、Press the button only after the punch has been tightened on the rivet. Otherwise, the piston produces a round-trip motion, which will consume some of the energy, and the piston hits the shell, causing damage to the rivet gun.
4、Use the protective spring to connect the punch to the gun body firmly to avoid the punch flying out and damaging people or products.

5、Hold the handle in your right hand and press the button with your index finger to start the rivet gun. You can use the button to adjust the size of the compressed air to ensure that the rivet gun works smoothly. Riveting just started because the rivet rod is long, rivet rod and rivet hole gap between the larger, by the hammering rivet rod easy to bend. Therefore, you should lightly press the button, so that the rivet gun power is small, to be filled with rivet rod rivet hole and then heavy pressure, increase the riveting power, the rapid formation of pier head, head near completion, and then gradually relax the button to prevent the pier head hit too low.
6, the tail of the punch, according to different rivet gun models, should not be used in series to avoid damage to the machine parts, reduce efficiency.
7, should not be used at will to play empty gun, to avoid damage to the machine parts.

The above is the BOFENG factory editor for willow nail gun use and precautions for the introduction of all, for the use of the willow nail gun, I believe that you have more or less understand the problem; I hope that the BOFENG factory editor’s introduction can help you, as it to BOFENG factory editor kudos.