How to use the rivet gun？

 

1、Inject a small amount of lubricant from the air inlet nozzle before starting work to ensure the rivet gun’s operational performance and working life.
2、Maintain the required inlet pressure. If the inlet pressure is too small, it will reduce the power of the riveting hammer, which will not only result in low riveting efficiency but may also result in cracking of the rivet head due to excessive hammering.
3、Press the button only after the punch has been tightened on the rivet. Otherwise, the piston produces a round-trip motion, which will consume some energy, and the piston hits the shell, causing damage to the rivet gun.
4、Use the protective spring to firmly connect the punch to the gun body to avoid the energy flying out and damaging people or products.
5、Hold the handle in your right hand and press the button with your index finger to start the rivet gun. You can use the button to adjust the size of the compressed air to ensure that the rivet gun works smoothly. Riveting just begun because the rivet rod is extended, rivet rod and rivet hole gap between the larger, by the hammering rivet rod easy to bend. Therefore, you should lightly press the button so that the rivet gun power is small and filled with a rivet rod rivet hole. Then heavy pressure increases the riveting ability to form the pier head, head near completion quickly, and gradually relax the button to prevent the pier head from hitting too low.
6, according to different rivet gun models, the tail of the punch should not be used in series to avoid damage to the machine parts and reduce efficiency.
7, should not be used at will to play empty gun, to avoid damage to the machine parts.
8, the use of the gun’s muzzle is strictly prohibited to people.